BGBST - IMPERIAL 2135TH, QUAL #634-D-346

  • MSDS: BGBST
  • Manufacturer: IMPERIAL OIL CO INC
  • Product Name: IMPERIAL 2135TH, QUAL #634-D-346
  • National Stock Number: 9150-00-985-7236
Product Identification

Product ID:IMPERIAL 2135TH, QUAL #634-D-346
MSDS Date:01/01/1987
FSC:9150
NIIN:00-985-7236
MSDS Number: BGBST

Responsible Party
IMPERIAL OIL CO.,INC

Emergency Phone: (201) 591-9400

Cage: 58563

Contractor
OCTAGON PROCESS INC.
EDGEWATER, NJ 07020 US

Telephone: 201-945-9400

Cage: 82925

Ingredients

HYDRAULIC LUBRICANT,TURBINE-PETROLEUM BASE -(MFR DID NOT

Fraction By Weight: >99%

ACGIH TLV: 5 MG/CUM (MIST)


ADDITIVE (TYPE NOT SPECIFIED)(% WT IS <1%, PER MFR)

Fraction By Weight: <1%.

Hazards

Effects of Overexposure:NONE NOTED BY MFR. LOW TOXICITY & LOW HAZARD TO
HEALTH.

First Aid

First Aid:SKIN:WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER.
INHALED: REMOVE TO FRESH AIR. REMOVE CONTAMINATED CLOTHING.

Fire Fighting

Flash Point:425F/218C (COC)
Extinguishing Media:CO*2, FOAM, DRY CHEM & H*2O FOG.
Fire Fighting Procedures:USE MESA/NIOSH APPRVD SCBA;USE H*2O SPRAY TO
COOL CONTNRS.
Unusual Fire/Explosion Hazard:NONE NOTED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:DIKE & CONTAIN SPILL W/INERT
MATERIAL(SAND,EARTH,FULLERS EARTH ETC.) TRANSFER LIQ TO DRUMS OR
OTHER CONTAINERS FOR RECOVERY/DISPOSAL.AREA MAY AVOID
FALLS."PREVENT MATL FROM GETTING INTO SEWERS/OPEN BO DIES OF H*2O".

Handling

Handling and Storage Precautions:LOW TEMPERATURE STORAGE INCREASES THE
VISCOSITY OF THESE OILS.THESE OILS WILL STOP POURING AT -18C TO
-30C.

Exposure Controls

Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:NORMAL ROOM VENTILATION.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:EYEWASH FACILITY
Supplemental Safety and Health
MSDS FROM MFR IS NOT DATED. THIS DATA DESCRIBES OF MATL UNDER MILITARY
SYMBOL 2135 T-H OF MIL-H-17672D, 23 JAN,1984.

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:>600F/>315C
Vapor Pres:<1
Spec Gravity:0.876
Viscosity:ISO 68
Evaporation Rate & Reference:<1 (BU-ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:STRAW TO AMBER COLOR LIQUID, NO ODOR
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:ONLY WHEN BURNING,GIVES CARBON
MONOXIDE & CARBON DIOXIDE.
Conditions to Avoid Polymerization:MATERIAL WILL NOT POLMERIZE

Disposal

Waste Disposal Methods:INCINERATE IN APPROVED INCINERATOR OR DISPOSE OF
IN APPROVED CHEMICAL DUMP IN ACCORDANCE WITH LOCAL,STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.